The thyssenkrupp Endura MRL is thyssenkrupp's machine room less hydraulic elevator, under the branch of their Endura standard hydraulic elevator. It was made as a competitor to the Otis HydroFit. It uses enviromax, a high-performance vegetable-based biodegradable hydraulic fluid. ThyssenKrupp makes the Endura MRL Twinpost Above-Ground 1-stage, Endura MRL Twinpost Above-Ground 2-stage, and Endura MRL Twinpost Above-Ground 3-stage. The Endura MRL was introduced in late January-February 3, 2014.
Overview
The thyssenkrupp Endura MRL is a machine room less hydraulic elevator. The Endura MRL can be told apart from other thyssenkrupp hydraulic elevators by looking at the 2nd landing. If there are cabinets on the side of the door jamb, it is an Endura MRL. The model of an Endura MRL is Endura MRL Twinpost Above-Ground #-stage capacity number. Example: "Endura MRL Twinpost Above-Ground 2-stage 3000". There is also the 5000H, which has some different measurements.
Specs
- Holeless hydraulic.
- Machine room less.
- Signa4/Traditional/Vandal resistant fixtures.
- Serves up to 6 floors.
- Travel distances:
- 12'-8" for Endura MRL Twinpost Above-Ground 1-stage jack type.
- 23'-2 1/2" for Endura MRL Twinpost Above-Ground 2-stage jack type.
- 33'-6 1/2" for Endura MRL Twinpost Above-Ground 3-stage jack type.
- Speeds:
- 80/110/150 fpm for Endura MRL Twinpost Above-Ground 1/2 stage
- 80/100/125/150 fpm for Endura MRL Twinpost Above-Ground 3 stage.
- Capacities:
- 2100-4000 lbs for passenger elevators.
- 4500-5000 lbs for service elevators.
- Single side or center opening doors (Door operator provided by Wittur Group).
- Can have rear opening.
- Can be a single elevator, or a bank of up to 4 elevators.
Videos
Endura MRL - A New Elevator for Low-Rise Buildings from ThyssenKrupp Elevator Americas
ThyssenKrupp video about Endura MRL elevator
External links
|
"This elevator only serves two floors." This article is a stub. You can help Elevatorpedia by expanding it. |