IDLift3000 (talk | contribs) (Editing a gallery) |
IDLift3000 (talk | contribs) |
||
(9 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
+ | This is a list of [[Shanghai Mitsubishi]] elevator fixtures. Note that Shanghai Mitsubishi is a subsidiary of [[Mitsubishi (elevator)|Mitsubishi Electric Corporation]], so most of the fixtures listed in this page are based on Mitsubishi's fixtures, while a few of them are basically a remake of the Mitsubishi counterparts by Shanghai Mitsubishi. |
||
⚫ | |||
− | ==1990s== |
+ | ==Late 1980s to early 1990s== |
− | These are the same set of fixtures as the |
+ | These are the same set of fixtures as the one used in the late 1980s-early 1990s Mitsubishi elevators. The floor buttons are brown colored plastic with orange illumination and the floor indicators are digital 16-segments display, but there are also analog ones with printed numbers placed over a set of bulbs; these numbers lights up orange. The landing indicators uses analog display. The panels are dark brown colored resin. |
<gallery> |
<gallery> |
||
+ | 90s SM Lifts Palembang 1.jpg|1990s Shanghai Mitsubishi hall station in Palembang, Indonesia. |
||
Old SM Shunli 3.jpg|1990s Shanghai Mitsubishi hall station in Singapore. |
Old SM Shunli 3.jpg|1990s Shanghai Mitsubishi hall station in Singapore. |
||
Old SM Shunli 1.jpg|1990s Shanghai Mitsubishi car station in Singapore. |
Old SM Shunli 1.jpg|1990s Shanghai Mitsubishi car station in Singapore. |
||
Old SM Shunli 2.jpg|1990s Shanghai Mitsubishi car station in Singapore. |
Old SM Shunli 2.jpg|1990s Shanghai Mitsubishi car station in Singapore. |
||
− | + | 90s SM Lifts Palembang 3.jpg|1990s Shanghai Mitsubishi car station (with modified buttons) in Palembang, Indonesia. |
|
Shanghai Mitsubishi 1990s indicator.jpg|1990s Shanghai Mitsubishi floor indicator. |
Shanghai Mitsubishi 1990s indicator.jpg|1990s Shanghai Mitsubishi floor indicator. |
||
+ | Shanghai Mitsubishi capacity badge 1990s.jpg|An old 1990s Shanghai Mitsubishi elevator capacity plate. |
||
ShanhaiMitsu CarInd ITSquareLaksi.png|1990s Shanghai Mitsubishi car floor indicator. |
ShanhaiMitsu CarInd ITSquareLaksi.png|1990s Shanghai Mitsubishi car floor indicator. |
||
ShanhaiMitsu CarSt ITSquareLaksi.png|1990s Shanghai Mitsubishi car station. |
ShanhaiMitsu CarSt ITSquareLaksi.png|1990s Shanghai Mitsubishi car station. |
||
+ | 90s SM Lifts Palembang 4.jpg|1990s Shanghai Mitsubishi analog floor indicator in Palembang, Indonesia. |
||
</gallery> |
</gallery> |
||
− | == |
+ | ==Mid to late 1990s== |
+ | In the mid 1990s, Shanghai Mitsubishi also used the same set of fixtures as the one used in [[Mitsubishi GPS]] (or GRANDEE in Japan) elevators. These fixtures consist of dark grey colored "wave style" resin panels with dark grey square plastic buttons which lights up orange when pressed, and the standard Mitsubishi LED dot matrix floor indicators. It is unknown if the flat stainless steel panels were also available. |
||
+ | |||
+ | [[File:Shanghai Mitsubishi Traction Elevator @Novotel Xinqiao Hotel, Beijing China|thumb|center|335 px|Mid 1990s Shanghai Mitsubishi elevator in Beijing, China (video by: vief86mo)]] |
||
+ | |||
+ | ==2000s to 2010s== |
||
===Fixtures used in GPS-III and GPS-IIIB elevators=== |
===Fixtures used in GPS-III and GPS-IIIB elevators=== |
||
− | These are the same set of fixtures as the one used in [[Mitsubishi GPS-III]], [[Mitsubishi GPM-III|GPM-III]] and [[Mitsubishi GPX|GPX]] elevators from the late 1990s to mid 2000s, with square buttons |
+ | These are the same set of fixtures as the one used in Mitsubishi Electric's [[Mitsubishi GPS-III|GPS-III]], [[Mitsubishi GPM-III|GPM-III]] and [[Mitsubishi GPX|GPX]] elevators from the late 1990s to mid 2000s, with square buttons that light up orange when pressed and the standard Mitsubishi LED floor indicators. These fixtures were used in Shanghai Mitsubishi GPS-III and GPS-IIIB elevators. It is unknown if they were also used in other models. It is also unknown if vandal resistant buttons were also available. |
<gallery> |
<gallery> |
||
Line 28: | Line 36: | ||
===Fixtures used in Shanghai Mitsubishi Elenessa elevators=== |
===Fixtures used in Shanghai Mitsubishi Elenessa elevators=== |
||
− | These fixtures are the same as the ones used in Mitsubishi Electric's [[Mitsubishi Elenessa|Elenessa]] elevators. The buttons can be a standard black barrel shaped plastic buttons or round stainless steel buttons with an illuminating tactile. |
+ | These fixtures are the same as the ones used in Mitsubishi Electric's [[Mitsubishi Elenessa|Elenessa]] elevators. The buttons can be a standard black barrel shaped plastic buttons or round stainless steel buttons with an illuminating tactile. Gill Sans Medium typeface is used for the button lettering, and the button for the main/ground floor protrudes and is colored green (only applicable for side mounted car station). These fixtures are exclusive to Shanghai Mitsubishi Elenessa elevators manufactured between the mid 2000s and 2010s<ref>[https://elevbrochurearchive.files.wordpress.com/2018/07/elenessa1.pdf Shanghai Mitsubishi Elenessa brochure (older edition)] (Archived)</ref>. |
<gallery> |
<gallery> |
||
+ | SM Elenessa Car Station SG.jpg|Shanghai Mitsubishi Elenessa car station in Chong Pang Community Club, Singapore. |
||
(New Year's Eve Special) Mall of Indonesia, Jakarta Shanghai Mitsubishi Traction Elevator (P2)|Shanghai Mitsubishi Elenessa (MRL) elevator in Jakarta, Indonesia (video: sumosoftinc). |
(New Year's Eve Special) Mall of Indonesia, Jakarta Shanghai Mitsubishi Traction Elevator (P2)|Shanghai Mitsubishi Elenessa (MRL) elevator in Jakarta, Indonesia (video: sumosoftinc). |
||
</gallery> |
</gallery> |
||
===Fixtures used in HOPE-II elevators=== |
===Fixtures used in HOPE-II elevators=== |
||
− | These fixtures consist of square plastic buttons which light up orange when pressed and LED floor indicators. There are two types of buttons; one is the regular size and the other one is the smaller size |
+ | These fixtures consist of square plastic buttons which light up orange when pressed and LED floor indicators. There are two types of buttons; one is the regular size and the other one is the smaller size, the latter are normally used in high-rise installations to accommodate multiple buttons on the car station. The LED floor indicator inside the car has the same arrangement as the one used in the GPS-III/GPS-IIIB elevators, in which the arrow is positioned next to the number. These fixtures are used in [[Shanghai Mitsubishi HOPE-II]]<ref>[https://elevbrochurearchive.files.wordpress.com/2018/07/hope-ii.pdf Shanghai Mitsubishi HOPE-II brochure] (Archived)</ref>. They can also be used in [[Shanghai Mitsubishi LEHY-II]] elevators as an option<ref>[https://elevbrochurearchive.files.wordpress.com/2018/07/lehy-ii-newer-edition.pdf Shanghai Mitsubishi LEHY-II brochure] (Archived)</ref>. These fixtures appear to be no longer made by Shanghai Mitsubishi. |
<gallery> |
<gallery> |
||
Shanghai Mitsubishi buttons.jpg|Shanghai Mitsubishi black square buttons. |
Shanghai Mitsubishi buttons.jpg|Shanghai Mitsubishi black square buttons. |
||
Shanghai Mitsubishi Hall Fixtures Shanghai.jpg|2000s Shanghai Mitsubishi hall station. |
Shanghai Mitsubishi Hall Fixtures Shanghai.jpg|2000s Shanghai Mitsubishi hall station. |
||
− | + | ShanghaiMitsubishi CallStation DynastyGrandeHotel.png|Shanghai Mitsubishi hall station. |
|
ShanghaiMitsubishi CarStation DynastyGrandeHotel.png|Shanghai Mitsubishi car station with black square buttons. |
ShanghaiMitsubishi CarStation DynastyGrandeHotel.png|Shanghai Mitsubishi car station with black square buttons. |
||
− | + | SM high-rise push buttons.jpeg|High-rise Shanghai Mitsubishi elevator car station with smaller button and card reader on the bottom. |
|
− | SM high-rise push buttons.jpeg|High-rise Shanghai Mitsubishi elevator car station with an RFID reader (bottom) |
||
ShanghaiMitsubishi_CarIndicator_DynastyGrandeHotel.png |
ShanghaiMitsubishi_CarIndicator_DynastyGrandeHotel.png |
||
Shanghai_Mitsubishi_LED_indicator.jpg |
Shanghai_Mitsubishi_LED_indicator.jpg |
||
SMEC_INDICATOR.jpg |
SMEC_INDICATOR.jpg |
||
⚫ | |||
</gallery> |
</gallery> |
||
==2010s to current== |
==2010s to current== |
||
===Fixtures used in LEHY-II elevators=== |
===Fixtures used in LEHY-II elevators=== |
||
− | These fixtures are used in Shanghai Mitsubishi LEHY-II elevators. There are four types of buttons used in these fixtures. One is a round stainless steel button that is flushed and light up orange when pressed, one is a concave button with a silver frame and orange illumination, one is a convex button which made of resin and light up white when pressed, and one is a square stainless steel button which if pressed it will light up orange on the halo and white on the number or symbol. For the floor indicators, they can be a standard LED dot matrix (with a scrolling arrow on the hall stations), a black LCD display with white characters, or a black LCD display with a yellow characters. |
+ | These fixtures are used in [[Shanghai Mitsubishi LEHY-II]] elevators. There are four types of buttons used in these fixtures. One is a round stainless steel button that is flushed and light up orange when pressed, one is a concave button with a silver frame and orange illumination, one is a convex button which made of resin and light up white when pressed, and one is a square stainless steel button which if pressed it will light up orange on the halo and white on the number or symbol. For the floor indicators, they can be a standard LED dot matrix (with a scrolling arrow on the hall stations), a black LCD display with white characters, or a black LCD display with a yellow characters. |
<gallery> |
<gallery> |
||
Line 73: | Line 82: | ||
===Fixtures used in LEHY-MRL elevators=== |
===Fixtures used in LEHY-MRL elevators=== |
||
− | These fixtures are used in Shanghai Mitsubishi LEHY- |
+ | These fixtures are used in [[Shanghai Mitsubishi LEHY-MRL]] elevators. |
====Older batch==== |
====Older batch==== |
||
− | There are two types of buttons used in these fixtures; one is a round stainless steel button that is flushed and light up orange when pressed, and the other one is a black convex button which light up orange when pressed. Floor indicators are mostly in LED dot matrix display with a scrolling arrow, but there is also an |
+ | There are two types of buttons used in these fixtures; one is a round stainless steel button that is flushed and light up orange when pressed, and the other one is a black convex button which light up orange when pressed. Floor indicators are mostly in LED dot matrix display with a scrolling arrow, but there is also LCD display as an option<ref>[https://elevbrochurearchive.files.wordpress.com/2018/07/lehy-mrl-older-edition.pdf Shanghai Mitsubishi LEHY-II brochure (2013 edition)] (Archived)</ref>. |
<gallery> |
<gallery> |
||
Line 87: | Line 96: | ||
====Newer batch==== |
====Newer batch==== |
||
+ | In the mid 2010s, the LEHY-MRL elevators received a newly redesigned fixtures set. These includes six new button types: |
||
− | In the mid 2010s, Shanghai Mitsubishi overhauled the fixtures for LEHY-MRL elevators. The new design features four types of buttons; one is a flushed stainless steel round button with an illuminating halo and number, one is a round resin button, one is a round stainless steel touch sensitive buttons with an illuminating halo and number, and one is a square button made of resin which light up entirely when pressed. |
||
+ | *'''A11''': 35mm diameter round stainless steel buttons with illuminating number and halo. |
||
+ | *'''A01''': 31mm diameter round stainless steel buttons with illuminating number and halo. |
||
+ | *'''A09''': Round stainless steel buttons with illuminating number (light up orange when pressed) |
||
+ | *'''B02''': Round resin buttons which light up orange entirely when pressed. |
||
+ | *'''A23''': Round touch sensitive buttons which light up blue and white when touched. |
||
+ | *'''D01''': Square patterned resin buttons which light up white when pressed. |
||
− | The floor indicators can be a standard LED dot matrix or an LCD display. The indicators on the hall stations have a scrolling arrow. |
+ | The floor indicators can be a standard LED dot matrix or an LCD display. The indicators on the hall stations have a scrolling arrow<ref>[https://elevbrochurearchive.files.wordpress.com/2018/07/lehy-mrl-latest-edition.pdf Shanghai Mitsubishi LEHY-MRL brochure (2016 edition)] (Archived)</ref>. |
===Fixtures used in LEHY-III elevators=== |
===Fixtures used in LEHY-III elevators=== |
||
− | These fixtures are used in Shanghai Mitsubishi LEHY-III elevators. There are |
+ | These fixtures are used in Shanghai Mitsubishi LEHY-III elevators. There are five types of buttons used in these fixtures: |
+ | *Round touch sensitive button which made of resin and light up orange when touched. |
||
+ | *Round stainless steel touch sensitive button which light up blue when touched. |
||
+ | *Black resin push button with an orange illumination. |
||
+ | *Concave button with a silver frame and orange illumination. |
||
+ | *Square patterned resin buttons which light up white when pressed. |
||
+ | |||
+ | The floor indicators can be a white or orange LED dot matrix or an LCD display<ref>[https://elevbrochurearchive.files.wordpress.com/2018/07/lehy-iii.pdf Shanghai Mitsubishi LEHY-III brochure] (Archived)</ref> |
||
===Fixtures used in LEHY-III-S elevators=== |
===Fixtures used in LEHY-III-S elevators=== |
||
− | The fixtures used in Shanghai Mitsubishi LEHY-III-S elevators are basically the same as the ones used in the newer LEHY-MRL elevators, |
+ | The fixtures used in Shanghai Mitsubishi LEHY-III-S elevators are basically the same as the ones used in the newer LEHY-MRL elevators, but with only four types of buttons available:<ref>[https://elevbrochurearchive.files.wordpress.com/2018/10/lehy111.pdf Shanghai Mitsubishi LEHY-III S brochure] (Archived)</ref>. |
+ | *'''A11''': 35mm diameter round stainless steel buttons with illuminating number and halo. |
||
+ | *'''A01''': 31mm diameter round stainless steel buttons with illuminating number and halo. |
||
+ | *'''A04 / A14''': Same as A01 but with braille marks. A04 refers to the inside buttons while A14 refers to the landing call buttons. |
||
+ | *'''A09''': Round stainless steel buttons with illuminating number (light up orange when pressed) |
||
− | ===Fixtures used in LEHY-M elevators=== |
+ | ===Fixtures used in LEHY-M, LEHY-M-II and LEHY-H elevators=== |
+ | These fixtures are used in [[Shanghai Mitsubishi LEHY-M]], LEHY-M-II and LEHY-H high-rise elevators<ref>[https://elevbrochurearchive.files.wordpress.com/2018/07/lehy-m.pdf Shanghai Mitsubishi LEHY-M brochure] (Archived)</ref><ref>[https://elevbrochurearchive.files.wordpress.com/2020/07/shanghai-mitsubishi-elevator-lehy-m-ii-en.pdf Shanghai Mitsubishi LEHY-M-II / LEHY-H brochure] (Archived)</ref>. There are three types of buttons used in these fixtures; |
||
− | These fixtures are used in Shanghai Mitsubishi LEHY-III high-rise elevators. There are three types of buttons used in these fixtures; one is a concave button with a silver frame and orange illumination, one is a convex button which made of resin and light up white when pressed, and one is a square stainless steel button which if pressed it will light up blue on the halo and white on the number or symbol. The floor indicators can be a HD true color LED display or a multimedia-style LCD display. |
||
+ | *Round concave buttons with a silver frame and orange illumination. |
||
+ | *Square patterned resin buttons with white illumination. |
||
+ | *Black round convex resin buttons with orange illumination and braille marks. |
||
+ | *Round convex resin buttons which light up white when pressed (discontinued) |
||
+ | *Square stainless steel button which light up blue on the halo and white on the number or symbol (discontinued) |
||
+ | |||
+ | The floor indicators can be a HD true color LED display or a multimedia-style LCD display. |
||
<gallery> |
<gallery> |
||
Line 104: | Line 137: | ||
SM_ELD_indicator.jpg|Shanghai Mitsubishi HD true color LED floor indicator used in a LEHY-M high rise elevator. |
SM_ELD_indicator.jpg|Shanghai Mitsubishi HD true color LED floor indicator used in a LEHY-M high rise elevator. |
||
</gallery> |
</gallery> |
||
+ | |||
+ | ===Fixtures used in Elenessa elevators=== |
||
+ | These fixtures are the same as the ones used in Mitsubishi's [[Mitsubishi NEXIEZ|NEXIEZ]] and current Elenessa models, but bears the name "Shanghai Mitsubishi" instead. The buttons are round stainless steel with an illuminating halo and tactile. The illumination color are mostly yellow orange, but there is also blue and white. These fixtures are exclusive to the newer Shanghai Mitsubishi Elenessa model produced since the 2010s<ref>[https://elevbrochurearchive.files.wordpress.com/2020/07/shanghai-mitsubishi-elevator-elenessa-en.pdf Shanghai Mitsubishi Elenessa brochure (newer edition)] (Archived)</ref>. |
||
+ | |||
+ | [[File:BRAND NEW Shanghai Mitsubishi MRL Tra. Ele. at Setun' Commuter Train Station, Mozhaysky in Moscow, R|thumb|center|335 px|Newer Shanghai Mitsubishi Elenessa elevator in Moscow, Russia (video by: ElevatorsinRussia)]] |
||
===Other fixtures=== |
===Other fixtures=== |
||
Shanghai Mitsubishi also makes another variant of fixtures which consist of square buttons that are flushed and light up orange when pressed and LED floor indicators. |
Shanghai Mitsubishi also makes another variant of fixtures which consist of square buttons that are flushed and light up orange when pressed and LED floor indicators. |
||
+ | |||
+ | It is also possible for a Shanghai Mitsubishi elevator to be fitted with non-proprietary (generic) buttons like [[List of Everbright (Hong Kong) elevator fixtures|Everbright]] buttons to improve accessibility. An example of this can be found in elevators installed in some pedestrian footbridges in Macau, China. |
||
<gallery> |
<gallery> |
||
Line 114: | Line 154: | ||
Shanghai_Mitsubishi_LED_dot-matrix_car_floor_indicator_HK_Large.jpg |
Shanghai_Mitsubishi_LED_dot-matrix_car_floor_indicator_HK_Large.jpg |
||
</gallery> |
</gallery> |
||
+ | |||
+ | |||
+ | [[File:Brand New Shanghai Mitsubishi Glass Traction Elevator|350px|center|Newer Shanghai Mitsubishi Elenessa elevator in Macau, China with generic buttons (video by: vief86mo)]] |
||
==See also== |
==See also== |
||
*[[List of Mitsubishi elevator fixtures]] |
*[[List of Mitsubishi elevator fixtures]] |
||
+ | |||
+ | {{Reflist}} |
||
{{Template:Elevator Fixtures Guide}} |
{{Template:Elevator Fixtures Guide}} |
Revision as of 04:04, 18 July 2020
This is a list of Shanghai Mitsubishi elevator fixtures. Note that Shanghai Mitsubishi is a subsidiary of Mitsubishi Electric Corporation, so most of the fixtures listed in this page are based on Mitsubishi's fixtures, while a few of them are basically a remake of the Mitsubishi counterparts by Shanghai Mitsubishi.
Late 1980s to early 1990s
These are the same set of fixtures as the one used in the late 1980s-early 1990s Mitsubishi elevators. The floor buttons are brown colored plastic with orange illumination and the floor indicators are digital 16-segments display, but there are also analog ones with printed numbers placed over a set of bulbs; these numbers lights up orange. The landing indicators uses analog display. The panels are dark brown colored resin.
Mid to late 1990s
In the mid 1990s, Shanghai Mitsubishi also used the same set of fixtures as the one used in Mitsubishi GPS (or GRANDEE in Japan) elevators. These fixtures consist of dark grey colored "wave style" resin panels with dark grey square plastic buttons which lights up orange when pressed, and the standard Mitsubishi LED dot matrix floor indicators. It is unknown if the flat stainless steel panels were also available.
2000s to 2010s
Fixtures used in GPS-III and GPS-IIIB elevators
These are the same set of fixtures as the one used in Mitsubishi Electric's GPS-III, GPM-III and GPX elevators from the late 1990s to mid 2000s, with square buttons that light up orange when pressed and the standard Mitsubishi LED floor indicators. These fixtures were used in Shanghai Mitsubishi GPS-III and GPS-IIIB elevators. It is unknown if they were also used in other models. It is also unknown if vandal resistant buttons were also available.
Fixtures used in Shanghai Mitsubishi Elenessa elevators
These fixtures are the same as the ones used in Mitsubishi Electric's Elenessa elevators. The buttons can be a standard black barrel shaped plastic buttons or round stainless steel buttons with an illuminating tactile. Gill Sans Medium typeface is used for the button lettering, and the button for the main/ground floor protrudes and is colored green (only applicable for side mounted car station). These fixtures are exclusive to Shanghai Mitsubishi Elenessa elevators manufactured between the mid 2000s and 2010s[1].
Fixtures used in HOPE-II elevators
These fixtures consist of square plastic buttons which light up orange when pressed and LED floor indicators. There are two types of buttons; one is the regular size and the other one is the smaller size, the latter are normally used in high-rise installations to accommodate multiple buttons on the car station. The LED floor indicator inside the car has the same arrangement as the one used in the GPS-III/GPS-IIIB elevators, in which the arrow is positioned next to the number. These fixtures are used in Shanghai Mitsubishi HOPE-II[2]. They can also be used in Shanghai Mitsubishi LEHY-II elevators as an option[3]. These fixtures appear to be no longer made by Shanghai Mitsubishi.
2010s to current
Fixtures used in LEHY-II elevators
These fixtures are used in Shanghai Mitsubishi LEHY-II elevators. There are four types of buttons used in these fixtures. One is a round stainless steel button that is flushed and light up orange when pressed, one is a concave button with a silver frame and orange illumination, one is a convex button which made of resin and light up white when pressed, and one is a square stainless steel button which if pressed it will light up orange on the halo and white on the number or symbol. For the floor indicators, they can be a standard LED dot matrix (with a scrolling arrow on the hall stations), a black LCD display with white characters, or a black LCD display with a yellow characters.
Fixtures used in LEHY-MRL elevators
These fixtures are used in Shanghai Mitsubishi LEHY-MRL elevators.
Older batch
There are two types of buttons used in these fixtures; one is a round stainless steel button that is flushed and light up orange when pressed, and the other one is a black convex button which light up orange when pressed. Floor indicators are mostly in LED dot matrix display with a scrolling arrow, but there is also LCD display as an option[4].
Newer batch
In the mid 2010s, the LEHY-MRL elevators received a newly redesigned fixtures set. These includes six new button types:
- A11: 35mm diameter round stainless steel buttons with illuminating number and halo.
- A01: 31mm diameter round stainless steel buttons with illuminating number and halo.
- A09: Round stainless steel buttons with illuminating number (light up orange when pressed)
- B02: Round resin buttons which light up orange entirely when pressed.
- A23: Round touch sensitive buttons which light up blue and white when touched.
- D01: Square patterned resin buttons which light up white when pressed.
The floor indicators can be a standard LED dot matrix or an LCD display. The indicators on the hall stations have a scrolling arrow[5].
Fixtures used in LEHY-III elevators
These fixtures are used in Shanghai Mitsubishi LEHY-III elevators. There are five types of buttons used in these fixtures:
- Round touch sensitive button which made of resin and light up orange when touched.
- Round stainless steel touch sensitive button which light up blue when touched.
- Black resin push button with an orange illumination.
- Concave button with a silver frame and orange illumination.
- Square patterned resin buttons which light up white when pressed.
The floor indicators can be a white or orange LED dot matrix or an LCD display[6]
Fixtures used in LEHY-III-S elevators
The fixtures used in Shanghai Mitsubishi LEHY-III-S elevators are basically the same as the ones used in the newer LEHY-MRL elevators, but with only four types of buttons available:[7].
- A11: 35mm diameter round stainless steel buttons with illuminating number and halo.
- A01: 31mm diameter round stainless steel buttons with illuminating number and halo.
- A04 / A14: Same as A01 but with braille marks. A04 refers to the inside buttons while A14 refers to the landing call buttons.
- A09: Round stainless steel buttons with illuminating number (light up orange when pressed)
Fixtures used in LEHY-M, LEHY-M-II and LEHY-H elevators
These fixtures are used in Shanghai Mitsubishi LEHY-M, LEHY-M-II and LEHY-H high-rise elevators[8][9]. There are three types of buttons used in these fixtures;
- Round concave buttons with a silver frame and orange illumination.
- Square patterned resin buttons with white illumination.
- Black round convex resin buttons with orange illumination and braille marks.
- Round convex resin buttons which light up white when pressed (discontinued)
- Square stainless steel button which light up blue on the halo and white on the number or symbol (discontinued)
The floor indicators can be a HD true color LED display or a multimedia-style LCD display.
Fixtures used in Elenessa elevators
These fixtures are the same as the ones used in Mitsubishi's NEXIEZ and current Elenessa models, but bears the name "Shanghai Mitsubishi" instead. The buttons are round stainless steel with an illuminating halo and tactile. The illumination color are mostly yellow orange, but there is also blue and white. These fixtures are exclusive to the newer Shanghai Mitsubishi Elenessa model produced since the 2010s[10].
Other fixtures
Shanghai Mitsubishi also makes another variant of fixtures which consist of square buttons that are flushed and light up orange when pressed and LED floor indicators.
It is also possible for a Shanghai Mitsubishi elevator to be fitted with non-proprietary (generic) buttons like Everbright buttons to improve accessibility. An example of this can be found in elevators installed in some pedestrian footbridges in Macau, China.
See also
Notes and references
- ↑ Shanghai Mitsubishi Elenessa brochure (older edition) (Archived)
- ↑ Shanghai Mitsubishi HOPE-II brochure (Archived)
- ↑ Shanghai Mitsubishi LEHY-II brochure (Archived)
- ↑ Shanghai Mitsubishi LEHY-II brochure (2013 edition) (Archived)
- ↑ Shanghai Mitsubishi LEHY-MRL brochure (2016 edition) (Archived)
- ↑ Shanghai Mitsubishi LEHY-III brochure (Archived)
- ↑ Shanghai Mitsubishi LEHY-III S brochure (Archived)
- ↑ Shanghai Mitsubishi LEHY-M brochure (Archived)
- ↑ Shanghai Mitsubishi LEHY-M-II / LEHY-H brochure (Archived)
- ↑ Shanghai Mitsubishi Elenessa brochure (newer edition) (Archived)